Latest topics
» Villiers 9E / 30 series lighting plug
ignition coil EmptyYesterday at 8:07 pm by denman

» Help required with Falcon Trials project (scratch build)
ignition coil EmptyYesterday at 7:52 pm by Nigel Moth

» Fulmar seat
ignition coil EmptyYesterday at 6:55 pm by piston 197

» Whitch side is the left hand thread
ignition coil EmptyYesterday at 6:21 pm by woodenhead

» Fulmar Coil Problem
ignition coil EmptyYesterday at 5:15 pm by Rex Stewart

» Cylinder head.
ignition coil EmptyYesterday at 4:51 pm by piston 197

» New Member
ignition coil EmptyYesterday at 10:45 am by stevenbell

» Francis Barnett Green
ignition coil EmptyWed Jul 17, 2019 8:14 pm by Nigel Moth

» Plover Insurance
ignition coil EmptyWed Jul 17, 2019 8:01 pm by John Wakefield


ignition coil

Go down

ignition coil Empty ignition coil

Post  intrudin on Tue Apr 09, 2019 1:00 am

I picked up two 6 volt coils awhile back and just found out 2 into 1 won't work, I have a Cruiser 80 with a 2T motor .. any ideas on a alternative route?? there are twin lead 6 volt coils out there ,what should i be looking for,, also modern Battery?

Cheers
intrudin
intrudin

Posts : 100
Join date : 2017-05-02
Age : 67
Location : Orangeville Canada

Back to top Go down

ignition coil Empty Re: ignition coil

Post  peter@dunfordconstruction on Tue Apr 09, 2019 10:50 am

Hi Intrudin,

I did 2 bikes with the same spec just follow an 89 twin Cruiser wiring diagram if you feeling flush Villiers services do a great Electronic conversion for the 2T engines which is really good. They also do all the bits you need coils etc just ring Steve.

Peter
peter@dunfordconstruction
peter@dunfordconstruction

Posts : 377
Join date : 2014-10-28
Location : Lymington Hampshire

http://peter@dunfordconstruction.co.uk

Back to top Go down

ignition coil Empty Re: ignition coil

Post  intrudin on Tue Apr 09, 2019 11:06 pm

peter@dunfordconstruction wrote:Hi Intrudin,

I did 2 bikes with the same spec just follow an 89 twin Cruiser wiring diagram if you feeling flush Villiers services do a great Electronic conversion for the 2T engines which is really good.  They also do all the bits you need coils etc just ring Steve.

 Peter

Yes i saw that, but my budget right now is stretched, but maybe once i have got it up and running and proven i will go there Very Happy
intrudin
intrudin

Posts : 100
Join date : 2017-05-02
Age : 67
Location : Orangeville Canada

Back to top Go down

ignition coil Empty Re: ignition coil

Post  John Wakefield on Wed Apr 10, 2019 4:21 pm

These coils marketed for Yamaha Townmates (and other bikes) work well on the Villiers twins. Just need a suitable mounting bracket making up
https://www.ebay.co.uk/itm/143095148655

John Wakefield

Posts : 169
Join date : 2017-08-31

Back to top Go down

ignition coil Empty Ignition coil

Post  colk2004 on Sat Apr 13, 2019 11:55 am

I use a lot of MZ or Enfield stuff as it looks period and 6v stuff is still available. If its a genuine part its also pretty reliable. Pattern stuff, not so much!

Cheers Colin
colk2004
colk2004

Posts : 257
Join date : 2015-04-13
Age : 57
Location : York

Back to top Go down

ignition coil Empty Re: ignition coil

Post  Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum