Latest topics
» Cylinder head.
Clutch & Brake Adjusters EmptyYesterday at 5:59 pm by Rex Stewart

» Villiers 9E / 30 series lighting plug
Clutch & Brake Adjusters EmptyYesterday at 9:09 am by John Wakefield

» Whitch side is the left hand thread
Clutch & Brake Adjusters EmptyYesterday at 8:16 am by Kevin B Smith

» 6E clutch plate etc
Clutch & Brake Adjusters EmptyYesterday at 5:58 am by blackjak

» Help required with Falcon Trials project (scratch build)
Clutch & Brake Adjusters EmptyThu Jul 18, 2019 7:52 pm by Nigel Moth

» Fulmar seat
Clutch & Brake Adjusters EmptyThu Jul 18, 2019 6:55 pm by piston 197

» Fulmar Coil Problem
Clutch & Brake Adjusters EmptyThu Jul 18, 2019 5:15 pm by Rex Stewart

» New Member
Clutch & Brake Adjusters EmptyThu Jul 18, 2019 10:45 am by stevenbell

» Francis Barnett Green
Clutch & Brake Adjusters EmptyWed Jul 17, 2019 8:14 pm by Nigel Moth


Clutch & Brake Adjusters

Go down

Clutch & Brake Adjusters Empty Clutch & Brake Adjusters

Post  peter@dunfordconstruction on Sun Feb 24, 2019 1:22 pm

Please can anyone tell me where & who I can get some Clutch 7 Brake adjusters for the standard Handlebars with moulded on Levers.  They are very thin compared to modern ones such as Doherty etc
peter@dunfordconstruction
peter@dunfordconstruction

Posts : 377
Join date : 2014-10-28
Location : Lymington Hampshire

http://peter@dunfordconstruction.co.uk

Back to top Go down

Clutch & Brake Adjusters Empty Adjusters

Post  kerabo on Sun Feb 24, 2019 2:09 pm

Look up the Venhill page. They do everything connected to Cables.

Ken
kerabo
kerabo

Posts : 2679
Join date : 2008-02-11
Age : 69
Location : Falcon 87..1936 Cruiser 39. Falcon 81 Green Lane bitsa. Sunbeam S8. Honda Deuville.

Back to top Go down

Clutch & Brake Adjusters Empty cable adjusters

Post  piston 197 on Sun Feb 24, 2019 2:52 pm

The bars with moulded on levers never had adjustment at the bar end, depending on the model the adjuster was either at the engine/clutch.brake,carburettor end , or was a mid adjuster in the cable about 6" from the bar levers .
JH
piston 197
piston 197
Moderator

Posts : 4450
Join date : 2008-08-17
Location : ross-on-wye

Back to top Go down

Clutch & Brake Adjusters Empty Re: Clutch & Brake Adjusters

Post  peter@dunfordconstruction on Mon Feb 25, 2019 4:25 pm

Hi John & Ken,

Thanks for info. Venhill only do full kits or huge boxes of mixed fittings so I put my thinking cap on and decided to drill out the ends of the levers to fit the existing adjusters which are bigger but very good with a slot in. Bingo perfect! My be a good tip if anyone has same problem

Regards

Peter
peter@dunfordconstruction
peter@dunfordconstruction

Posts : 377
Join date : 2014-10-28
Location : Lymington Hampshire

http://peter@dunfordconstruction.co.uk

Back to top Go down

Clutch & Brake Adjusters Empty Re: Clutch & Brake Adjusters

Post  Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum