Latest topics
» Cylinder head.
rear - Rear shocks EmptyYesterday at 5:59 pm by Rex Stewart

» Villiers 9E / 30 series lighting plug
rear - Rear shocks EmptyYesterday at 9:09 am by John Wakefield

» Whitch side is the left hand thread
rear - Rear shocks EmptyYesterday at 8:16 am by Kevin B Smith

» 6E clutch plate etc
rear - Rear shocks EmptyYesterday at 5:58 am by blackjak

» Help required with Falcon Trials project (scratch build)
rear - Rear shocks EmptyThu Jul 18, 2019 7:52 pm by Nigel Moth

» Fulmar seat
rear - Rear shocks EmptyThu Jul 18, 2019 6:55 pm by piston 197

» Fulmar Coil Problem
rear - Rear shocks EmptyThu Jul 18, 2019 5:15 pm by Rex Stewart

» New Member
rear - Rear shocks EmptyThu Jul 18, 2019 10:45 am by stevenbell

» Francis Barnett Green
rear - Rear shocks EmptyWed Jul 17, 2019 8:14 pm by Nigel Moth


Rear shocks

Go down

rear - Rear shocks Empty Rear shocks

Post  intrudin on Sun Jun 24, 2018 11:18 pm

intrudin
intrudin

Posts : 100
Join date : 2017-05-02
Age : 67
Location : Orangeville Canada

Back to top Go down

rear - Rear shocks Empty Rear shocks

Post  piston 197 on Mon Jun 25, 2018 6:47 am

Yes same design as originals, just check that they can
supply the correct length and spring rate for you and the machine , if not Norman Blakemore (NJB shocks) should be able to
JH
piston 197
piston 197
Moderator

Posts : 4450
Join date : 2008-08-17
Location : ross-on-wye

Back to top Go down

rear - Rear shocks Empty Re: Rear shocks

Post  intrudin on Mon Jun 25, 2018 11:11 am

piston 197 wrote:Yes same design as originals, just check that they can
supply the correct length and spring rate for you and the machine , if not Norman Blakemore (NJB shocks) should be able to
JH

Thanks JH, depending on my measurements as the bushings are knackered they are 11 7/8 and 12" can you tell me Cruiser 80 spring rate???

thanks jimd
intrudin
intrudin

Posts : 100
Join date : 2017-05-02
Age : 67
Location : Orangeville Canada

Back to top Go down

rear - Rear shocks Empty Spring rate

Post  piston 197 on Mon Jun 25, 2018 11:53 am

The spring rate will be a combination of the weight at the rear end of the machine and your own weight, put the front and back wheels on 2 pairs of bathroom scales to get the weights at front and back and give the supplier the rear machine weight and your weight and if they know what they are doing should be able to supply the correct spring rate ? You then have the 3 positions of adjustment for when you are carrying a passenger
JH
piston 197
piston 197
Moderator

Posts : 4450
Join date : 2008-08-17
Location : ross-on-wye

Back to top Go down

rear - Rear shocks Empty Re: Rear shocks

Post  Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum