Latest topics
» Cylinder head.
rear - Cruiser 75 sprocket EmptyYesterday at 5:59 pm by Rex Stewart

» Villiers 9E / 30 series lighting plug
rear - Cruiser 75 sprocket EmptyYesterday at 9:09 am by John Wakefield

» Whitch side is the left hand thread
rear - Cruiser 75 sprocket EmptyYesterday at 8:16 am by Kevin B Smith

» 6E clutch plate etc
rear - Cruiser 75 sprocket EmptyYesterday at 5:58 am by blackjak

» Help required with Falcon Trials project (scratch build)
rear - Cruiser 75 sprocket EmptyThu Jul 18, 2019 7:52 pm by Nigel Moth

» Fulmar seat
rear - Cruiser 75 sprocket EmptyThu Jul 18, 2019 6:55 pm by piston 197

» Fulmar Coil Problem
rear - Cruiser 75 sprocket EmptyThu Jul 18, 2019 5:15 pm by Rex Stewart

» New Member
rear - Cruiser 75 sprocket EmptyThu Jul 18, 2019 10:45 am by stevenbell

» Francis Barnett Green
rear - Cruiser 75 sprocket EmptyWed Jul 17, 2019 8:14 pm by Nigel Moth


Cruiser 75 sprocket

Go down

rear - Cruiser 75 sprocket Empty Cruiser 75 sprocket

Post  Dodge 211 on Mon Oct 23, 2017 7:15 pm

Hi all I have a cruiser 75 with 18" wheels front and rear but I have no rear sprocket can anybody tell me how many teeth it should have,my friend has a similar bike but with a 48 tooth sprocket but in the handbook it says 52teeth any ideas ?Dodge 211

Dodge 211

Posts : 10
Join date : 2017-10-23

Back to top Go down

rear - Cruiser 75 sprocket Empty Sprocket

Post  kerabo on Mon Oct 23, 2017 7:37 pm

Roger.

Post it on the general chat or help wanted section of the Forum .It will then be seen
The Cruiser you have according to my list should have a 19" rear wheel so that will alter things. But don't hold me to it.
Regards Ken
kerabo
kerabo

Posts : 2679
Join date : 2008-02-11
Age : 69
Location : Falcon 87..1936 Cruiser 39. Falcon 81 Green Lane bitsa. Sunbeam S8. Honda Deuville.

Back to top Go down

rear - Cruiser 75 sprocket Empty rear sprocket

Post  piston 197 on Mon Oct 23, 2017 7:53 pm

The club had a batch made for the cruiser ( 52 teeth) some time back, there is one left if you need it ? I will p.m. you with price and address
JH
piston 197
piston 197
Moderator

Posts : 4450
Join date : 2008-08-17
Location : ross-on-wye

Back to top Go down

rear - Cruiser 75 sprocket Empty Re: Cruiser 75 sprocket

Post  Dodge 211 on Tue Oct 24, 2017 7:35 pm

Thanks for the reply ,I'm not sure but I think at first 19" wheels were used then they went to 18" front and later 18" rear is this correct?

Dodge 211

Posts : 10
Join date : 2017-10-23

Back to top Go down

rear - Cruiser 75 sprocket Empty Wheel sizes

Post  piston 197 on Tue Oct 24, 2017 7:40 pm

Strangely no, the Cruiser 71 ( VB frame No 1955 ) had 19 back and front and the Cruiser 75 , 1956/7 ( frame No WB and YB)had the peculiar combination of 18 front and 19 back
Sprocket was the same except on the Cruiser 71 it was cast as part of the brake drum, the later machines the sprocket bolted on separately.
JH
piston 197
piston 197
Moderator

Posts : 4450
Join date : 2008-08-17
Location : ross-on-wye

Back to top Go down

rear - Cruiser 75 sprocket Empty Re: Cruiser 75 sprocket

Post  Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum